top of page

  1. Fang F. Z., Zhang X. D., Weckenmann A., Zhang G. X., Evans C., Manufacturing and measurement of freeform optics. CIRP Annals-Manufacturing Technology. 2013; 62(2): 823-846.

  2. Gong H., Fang F. Z., Zhang X. F., Du J., Hu X. T., Study on the reduction strategy of machining-induced edge chipping based on finite element analysis of in-process workpiece structure. Journal of Manufacturing Science and Engineering-Transactions of the ASME. 2013; 135(1): 0110171-10.

  3. Hu X. K., Li Y. F., Fang F. Z., Li X., Li J., Chen Y. H., Zhang X. D., Chai L., Wang C. Y., Fedotov A. B., Zheltikov A., M. Enhancement of terahertz radiation from GaP emitters by subwavelength antireflective micropyramid structures. Optics Letters. 2013; 38(12): 2053-2055.

  4. Lai M., Zhang X. D., Fang F. Z., Nanoindentation-induced phase transformation and structural deformation of monocrystalline germanium: a molecular dynamics simulation investigation. Nanoscale Research Letters. 2013; 8(1): 1-9.

  5. Lai M., Zhang X. D., Fang F. Z., Wang Y. F., Feng M., Tian W. H. Study on nanometric cutting of germanium by molecular dynamics simulation. Nanoscale Research Letters. 2013; 8(1):124-132.

  6. Li Z. J., Fang F. Z., Gong H., Zhang X. D. Review of diamond-cutting ferrous metals. International Journal of Advanced Manufacturing Technology. 2013; 68(5-8): 1717-1731.

  7. Song L., Fang F. Z., Zhao J. B. Study on viscosity measurement using fiber Bragg grating micro-vibration. Measurement Science & Technology. 2013; 24(1):111-123.

  8. Xiao Y. J., Fang F. Z., Xu Z. W., Wu W., Shen X. C., The study of Ga+ FIB implanting crystal silicon and subsequent annealing. Nuclear Instruments & Methods in Physics Research Section B-Beam Interactions with Materials and Atoms. 2013; 307: 253-256.

  9. Xu Z. W., Xu L. H., Fang F. Z., Gao H. F., Li W. L., Carbon nanotube's modification by focused ion beam irradiation and its healing strategies. Nuclear Instruments & Methods in Physics Research Section B-Beam Interactions with Materials and Atoms. 2013; 307: 203-206.

  10. Yuan D. D., Zhu P. Z., Fang F. Z., Qiu C., Study of nanoscratching of polymers by using molecular dynamics simulations. Science China-Physics Mechanics & Astronomy. 2013; 56(9): 1760-1769.

  11. Zhang X. D., Fang F. Z., Wu Q. Q., Liu X. L., Gao H. M. Coordinate transformation machining of off-axis aspheric mirrors. International Journal of Advanced Manufacturing Technology. 2013; 67(9-12): 2217-2224.

  12. Zhang X. D., Fang F. Z., Yu L. H., Jiang L. L., Guo Y. W., Slow slide servo turning of compound eye lens. Optical Engineering. 2013; 52(2): 023401.

  13. Zhao C. Y., Gong H., Fang F. Z., Li Z. J., Experimental study on the cutting force difference between rotary ultrasonic machining and conventional diamond grinding of K9 glass. Machining Science and Technology. 2013; 17(1): 129-44.

  14. Li G. H., Xu Z. W., Fang F. Z., Wu W., Xing X. D., Li W. L., Liu H. Z., Micro cutting of V-shaped cylindrical grating template for roller nano-imprint. Journal of Materials Processing Technology. 2013; 213(6): 895-904.

  15. Hu X. K., Li Y. F., Fang F. Z., Li X., Li J., Chen Y. H., Zhang X. D., Chai L., Wang C. Y., Fedotov A. B., Zheltikov A. M., Enhancement of terahertz radiation from GaP emitters by subwavelength antireflective micropyramid structures. Optics Letters. 2013; 38(12): 2053-2055.

  16. Qiu Z. J., Fang F. Z., Zhao Q. Z., Zhou L. B., Online image measurement method for micro-round nose diamond turning tools. Journal of Mechanical Engineering. 2013; 49(17): 26-32.

  17. Xu F. F., Zhang X. D., Fang F. Z., Characterization of single point diamond machined single-crystal silicon. Nanotechnology and Precision Engineering. 2013; 11(6): 485-491.(in Chinese)

  18. Du J., Li Z. J., Gong H., Fang F. Z., Study on the mechanisms and control method of edge chipping fracture in the machining of brittle and hard materials. Mechanical Science and Technology. 2013,32(10);1451-1455.(in Chinese)

  19. Duan Q., Qiu Z. J., Fang F. Z., Near infrared heating method and device study on micro-injection mould. China Plastics Industry. 2013; 41(12): 32-35.(in Chinese)

  20. Qiu Z. J., Fang F. Z., Zhao Q. Z., Zhou L. B., Online image measurement method for micro-round nose diamond turning tools. Chinese Journal of Mechanical Engineering. 2013; 49(17): 26-32.(in Chinese)

  21. Chen X. W., Zhang X. D., Fang F. Z., Simulating nanometric cutting mechanism of single-crystal copper with quasicontinuum numerical method. Mechanical Science and Technology. 2013; 32(8): 1098-1102.(in Chinese)

  22. Fang F. Z., Xu Z. W., Technology and progress of nano machining using focused ion beam. Transactions of the Heilongjiang University of Science and Technology. 2013; (3): 211-221.(in Chinese)

  23. Qiu Z. J., Yi P., Lu C., Fang F. Z., Mechanical property analysis of modified quartz glass. Journal of Materials Science and Engineering. 2013; (1): 6-10.(in Chinese)

  24. Huang K. T., Fang F. Z., Gong H., Effect of surface microscopic topology generated by ultra-precision turning on optical characteristics. Optics and Precision Engineering. 2013; 21(1): 101-107.(in Chinese)

  25. Fang F. Z., Cheng Y., Zhang X. D., Design of freeform optics. Advanced Optical Technologies. 2013; 2(5-6): 445-453.

  26. Li Z. J., Fang F. Z., Gong H., Review of diamond-cutting ferrous metals. International Journal of Advanced Manufacturing Technology. 2013; 1(15): 1717-1731.

  27. Li Z. J., Fang F. Z., Gong H., Zhang X. D., Effects of surface modifications on steel’s machinability in single-point diamond turning. International Journal of Precision Technology. 2013; 3(2): 105-116.

  28. Zhang X. D., Wang Q. C., Fang F. Z., Liu X. L., Controllable fabrication of freeform optics. International Journal of Precision Technology. 2013; 3(3): 277-289.

  29. Wang J., Fu Y. Q., Xu Z. W., Fang F. Z., Influence of interaction between fiber probe and sample surface on near-field probing of plasmonic structures. Quantum Matter. 2013; 2(4): 289-295.

bottom of page