top of page

  1. Liu Z., Lyu P., Lai M., Fang F. Z., Study on superfinishing of single crystal lutetium oxide by cerium oxide slurry. International Conference on Nanomanufacturing. 2022.

  2. You K., Niu Y., Zuo J., Jiang J., Fang F. Z., A modification method of nano-constitutive model based on indentation experiment. International Conference on Nanomanufacturing. 2022.

  3. Shen. G., Fang F. Z., Zhang J. F., The effect of sliding orientation and floor profile on the tribological performance of textured bioimplants. International Conference on Nanomanufacturing. 2022.

  4. Lyu P., Liu Z., Lai M., Fang. F. Z., Study on ultra-smooth finishing of lutetium oxide single crystal using plasma-assisted polishing. International Conference on Nanomanufacturing. 2022.

  5. Bennett A, Yu N., Castelli M., Chen G. D., Fang. F. Z., Etching characteristics of crystal quartz by surface wave microwave induced plasma. Applied Optics and Photonics China (AOPC 2020): Optics Ultra Precision Manufacturing and Testing. 2020.

  6. Mathew P. T., Fang F. Z., Periodic energy decomposition analysis for the application of electronic transport across a molecular junction. International PRN Conference. 2019.

  7. Zhang H. G., Zhang N., Fang F. Z., Development of high hardness, self-lubrication nickel/graphene oxid compresite coating using ultrasonic assisted electrodeposition. International PRN Conference. 2019.

  8. Zhang H. Y., Fang F. Z., Gilchrist M. D., Zhang N., Precision replication of micro lensed arrays using variotherm and in-mould micro compression assisted injection mouldiddng. International PRN Conference. 2019.

  9. Zhang Y. F., Fang F. Z., Fan W., Huang W., Wang C., Ma S. S., He J. H., Research on magnetorheological finishing of aspheric optics for single-crystal silicon. Second Symposium on Novel Technology of X-Ray Imaging. 2018.

  10. Yan G. P., You K. Y., Fang F. Z., Ultraprecision grinding of small-aperture concave aspheric mould insert with tilt axis method. 4th CIRP Conference on Surface Integrit. 2018.

  11. Shi C. K., Luo H. H., Xu Z. W., Fang F. Z., Nitrogen-vacancy color centers in diamond fabricated by ultrafast laser nanomachining. Simulation and Experimens of Material-Oriented Ultra-Precision Machining. 2018.

  12. Zhang H. Y., Fang F. Z., Gilchrist M. D., Zhang N. Experimental and numerical study of the filling of a micro feature based on a microfluidic flow cytometer chip using micro injection moulding. 6th International Conference on Nanomanufacturing (nanoMan2018). 2018.

  13. Lv P., Lai M., Zhang J. F., Fang F. Z., Characterization of Lu2O3 surface processed by plasma-assisted etching. 6th International Conference on Nanomanufacturing (nanoMan2018). 2018.

  14. Yuan Y. K., Gu C. Y., Yan G. P., Fang F. Z., Mechanical property and modal analysis of ultra-thin mirrors. National Academic Forum for PhD Students in Instrumental Science, Optical Engineering and Biomedical Engineering. 2018.

  15. Li Z. X., Fang F. Z., Zhu L. L., Huang S. Y., Zhang X. D., Tool srvo asisted utra-precision turning of freeform optics on infrared materials. 7th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2017). 2017.

  16. Zhang Y., Fang F. Z., Song L., Study on performance evaluation for collimating lens of laser diode. 7th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2017). 2017.

  17. Xu Z. W., Fang F. Z., Wu W., Li W. L., He S. T., Hu M. L. Removal of nanoscale damage induced by FIB nanofabrication on single-crystal diamond using femtosecond laser treatment. Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology. 2016.

  18. Liu X. L., Zhang X.D., Fang F. Z., Machining errors analysis based on the optical performance evaluation in ultra-precision turning. 5th International Conference on Nanomanufacturing(nanoMan2016). 2016.

  19. Xu F. F., Wang J. S., Zhang X.D., Fang F. Z., Study on tool edge shape effect in nano-cutting. 5th International Conference on Nanomanufacturing (nanoMan2016). 2016.

  20. Gao H. M., Zhang X.D., Fang F. Z., Axicon profile metrology using contact stylus method. 5th International Conference on Nanomanufacturing (nanoMan2016). 2016.

  21. Pang K., Song L., Fang F. Z., Zhang Y., Zhang H. Y. Large field of view curved compound eye imaging system using optical freeform surface. 5th International Conference on Nanomanufacturing (nanoMan2016). 2016.

  22. Lai M., Zhang X.D., Fang F. Z., Crystal orientation effect on the subsurface deformation of monocrystalline germanium in nanometric cutting. 5th International Conference on Nanomanufacturing (nanoMan2016). 2016.

  23. Zeng Z., Zhang X.D., Fang F. Z., Interferometry system calibration with a reflective spatial light modulator for optical surface. 5th International Conference on Nanomanufacturing (nanoMan2016). 2016.

  24. Jiang L. L., Zhang X.D., Fang F. Z., Non-linear phase error compensation for fringe deflectometry measuring system. 5th International Conference on Nanomanufacturing (nanoMan2016). 2016.

  25. Wang J. S., Zhang X.D., Fang F. Z., Effects of the amorphous layer thickness on nanometric cutting. 5th International Conference on Nanomanufacturing (nanoMan2016). 2016.

  26. Gong H., Pan L., Li Z.J., Fang F. Z., Study on a novel ultrasonic device for diamond turning. 4th International Conference on Nanomanufacturing (nanoMan2014). 2014.

  27. Chen X. W., Zhang X. D., Fang F. Z., Lai M., Xu F. F., Effect of crystal orientations on nanocutting based on quasicontinuum multiscale method. International Conference on Multimedia Technology (ICMT).2013.

  28. Zhang H. X., Zou C. G., Song L., Zhang X. D., Fang F. Z., Jia D. G., Zhang Y. M., Curved compound eye imaging system with a large field of view based on a plano-concave substrate. Proc. Advanced Optical Manufacturing and Testing Technologies (AOMATT). 2012.

  29. Zhang H. X., Zou C. G., Song L., Zhang X. D., Fang F. Z., Jia D. G., Zhang Y. M. Curved compound eye imaging system with a large field of view based on a plano-concave substrate. 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Design, Manufacturing, and Testing of Smart Structures, Micro- and Nano- Optical Devices, and Systems. 2012.

  30. Wang Q. C., Zhang X. D., Peng Y., Fang F. Z., Data filtering of optical freeform measurement based on a modified 2D cascaded approximating spline filter. 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies. 2012.

  31. Zhang H. X., Zou C. G., Song L., Zhang X. D., Fang F. Z., Jia D.G., Zhang Y. M., Curved compound eye imaging system with a large field of view based on a plano-concave substrate. Advanced Optical Manufacturing and Testing Technologies (AOMATT). 2012.

  32. Zhang X. D., Li P., Fang F. Z., Wang Q. C. Ultra-precision turning of complex spiral optical delay line. International Conference on Optical Instruments and Technology: Solid State Lighting and Display Technologies, Holography, Speckle Pattern Interferometry, and Micro/Nano Manufacturing and Metrology. 2011.

  33. Liu X. D., Lee L. C., Ding X., Fang F. Z., Ultraprecision turning of aspherical profiles with deep sag. IEEE International Conference on Industrial Technology (IEEEICIT). 2002.

  34. Liu N., Zhang Y. M., Fang F. Z., A novel method of lens initial structure selection: study on strcture-aperture relationship of finite image distance achromatic spherical microscope objective with larger numerical aperture-art. Optical Design and Testing III. 2007

  35. Zhang Z. G., Fang F. Z., Sun C. K., Nano-scale cutting mechanism by molecular dynamics simulation. 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Design, Manufacturing, and Testing of Micro- and Nano-Optical Devices and Systems. 2007.

  36. Wang Q. Y., Fang F. Z., Hu X. T., Comprehensive review of micro/meso-scale machine tool-art. 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Design, Manufacturing, and Testing of Micro- and Nano-Optical Devices and Systems. 2007.

  37. Zhang S. J., Fang F. Z., Hu X. T., Advances of focused ion beam in Micromachining Technology. 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Design, Manufacturing, and Testing of Micro- and Nano-Optical Devices and Systems. 2007.

  38. Fang F. Z., Liu Y. C., Hu X., Machining monocrystalline silicon without cracks. The 1st Topical Meeting on Microfactories. 2006.

  39. Fang F. Z., Liu Y. C., Energy variation of micro-cracking on single crystal silicon. Advanced Laser Technologies. 2005.

  40. Fang F. Z., Wu H., Liu X. D., Lim G. C., Liu Y. C., Ng S. T., Fabrication of micro grooves, American Society for Precision Engineering (ASPE)-18th Annual Meeting. 2003.

  41. Liu X. D., Ding X., Lee L. C., Fang F. Z., Lim G. C., Direct single point diamond cutting of Stavax assisted with ultrasonic vibration to produce optical quality surface finish. American Society for Precision Engineering (ASPE)-18th Annual Meeting. 2003.

  42. Liu X. D., Lee L. C., Ding X., Fang F. Z., Ultra-precision turning of aspheric profiles with deep sag. IEEE International Conference on Integration Technology (IEEE ICIT). 2002.

  43. Fang F. Z., Lee L. C., Liu X. D., Experimental study of high speed milling of hardened steel with CL mist and chilled air. International Conference on Precision Engineering & Nanotechnology (ICPN). 2002

  44. Liu X. D., Lee L. C., Fang F. Z., Lau S. K., Chan P. S., Shrinkage error compensation of plastic lenses by modifying mold insert using diamond turning. 2nd Euspen International Conference. 2001.

  45. Fang F. Z., ThoeT . B., Song W., Shaw K. C., Energy dissipation in high speed milling. International Conference on Precision Engineering (ICoPE).2000.

  46. Fang F. Z., Lee L. C., Song W., Thoe T. B., Liu, X. D., Study on high speed milling of hardened steel. International Conference on Advances in Management and Technology (ICAMT), 2000.

  47. Fang F. Z., Mirror surface finishing for gallium arsenide. American Society for Precision Engineering (ASPE)-15nd Annual Meeting. 1999.

  48. Fang F. Z., Ngoi K. A., Two-frequency laser measuring technique with high axis-velocity. International Conference on Applied Optical Metrology. 1998.

  49. Fang F. Z., Venkatesh V. C., On high quality diamond turned silicon surfaces. American Society for Precision Engineering (ASPE)-13rd Annual Meeting. 1997.

  50. Fang F. Z., Zhang G. X., Study on a novel method on refractive compensation of in-process measuring system. American Society for Precision Engineering (ASPE)-12nd Annual Meeting. 1996.

  51. Fang F. Z., Zhang G. X., The principle of AOM laser heterodyne measuring and its instrument. Automated Optical Inspection for Industry. 1996.

  52. Fang F. Z., Zhang Y. Q., Zhang F. H., Dong S., Yuan Z. J., Research on enhancing in-process measuring system precision of an ultra-precision turning machine. Industrial Optical Sensors for Metrology and Inspection. 1995.

  53. Fang F. Z., Yuan Z. J., A novel in-process measuring system for ultra-precision turning machines. IEEE International Conference on Integration Technology (IEEE ICIT’94). 1994.

  54. Fang F. Z., Yuan Z. J., Study on the accuracy improvement of a two-frequency laser measuring system applied in ultra-precision turning machines. The 5th Sino-Jopan Jiont Seminar on Ultra-precision Machining. 1994.

  55. Yuan Z. J., Fang F. Z., New tip relief gear and its precision machining. International Conference on Information Systems and Computing Technology (ISCT). 1993.

  56. Tan F. Z., Fang F. Z., Measurement on the larger diameter circle and un-cmplete circle. International Conference on Information Systems and Computing Technology (ISCT). 1993.

bottom of page