1. Zhang X. D., Jiang L. L., Zeng Z., Fang F. Z., Liu X. L. High angular accuracy manufacture method of micro v-grooves based on tool alignment by on-machine measurement. Optics Express. 2015; 23(21):27819-27828.

  2. Xiao Y. J., Fang F. Z.*, Xu Z. W., Hu X. T. Annealing recovery of nanoscale silicon surface damage caused by Ga focused ion beam. Applied Surface Science. 2015; 343: 56-69.

  3. Fang F. Z.*, Liu B., Xu Z. W. Nanometric cutting in a scanning electron microscope. Precision Engineering-Journal of the International Societies for Precision Engineering and Nanotechnology. 2015; 41: 145-152.

  4. Chen W. H., Zhang X. D., Liu X. L., Fang F. Z. Optical design and simulation of a compact multi-aperture camera based on a freeform microlens array. Optics Communications. 2015; 338: 300-306.

  5. Zheng Y. L., Song L., Hu G., Cai X., Liu H. G., Ma J. Y., Zhao M. R., Fang F. Z. The multi-position calibration of the stiffness for atomic-force microscope cantilevers based on vibration. Measurement Science & Technology. 2015; 26(5): 055001.

  6. Gong H., Wang Y., Song L., Fang F. Z. Spiral tool path generation for diamond turning optical freeform surfaces of quasi-revolution. Computer-Aided Design. 2015; 59: 15-22.

  7. Wang J. S., Fang F. Z.*, Zhang X. D. An experimental study of cutting performance on monocrystalline germanium after ion implantation. Precision Engineering-Journal of the International Societies for Precision Engineering and Nanotechnology. 2015; 39: 220-223.

  8. Gao W. L., Fang F. Z., Liu Y. M., Zhang S. Chiral surface waves supported by biaxial hyperbolic metamaterials. Light-Science & Applications. 2015; 4(9): e328.

  9. Gao W. L., Lawrence M., Yang B. A., Liu F., Fang F. Z., Beri B., Li J. S., Zhang S. Topological photonic phase in chiral hyperbolic metamaterials. Physical Review Letters. 2015; 114(3): 037402.

  10. Fang F. Z.*, Xu F. F., Lai M. Size effect in material removal by cutting at nano scale. International Journal of Advanced Manufacturing Technology. 2015; 80(1-4): 591-598.

  11. Huang K. T., Gong H., Fang F. Z., Li Z. Generation of spherical non-uniform rational basis spline curves and its application in five-axis machining. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture. 2015; 229(7): 1104-1117.

  12. Liu X. L., Zhang X. D., Fang F. Z.*, Zeng Z., Gao H. M., Hu X. T. Influence of machining errors on form errors of microlens arrays in ultra-precision turning. International Journal of Machine Tools & Manufacture. 2015; 96: 80-93.

  13. Qiu Z. J., Yang X., Zheng H., Gao S., Fang F. Z. Investigation of micro-injection molding based on longitudinal ultrasonic vibration core. Applied Optics. 2015; 54(28): 8399-8405.

  14. Wang J., Fu Y. Q., Xu Z. W., Fang F. Z. Near-field visualization of plasmonic lenses: an overall analysis of characterization errors. Beilstein Journal of Nanotechnology. 2015; 6: 2069-2077.

  15. Wang Z. Q., Fang F. Z., Liu B., Wang Z. Y. An experimental method for eliminating effect of rigid out-of-plane motion on 2D-DIC. Optics and Lasers in Engineering. 2015; 73: 137-142.

  16. Yu J., Fang F. Z.*, Qiu Z. J. Aberrations measurement of freeform spectacle lenses based on Hartmann wavefront technology. Applied Optics. 2015; 54(5): 986-994.

  17. Han Q., Fu Y. Q., Jin L., Zhao J. J., Xu Z. W., Fang F. Z., Gao J. S., Yu W. X. Germanium nanopyramid arrays showing near-100% absorption in the visible regime. Nano Research. 2015; 8(7): 2216-2222.

  18. Hu X.T., Xu Z. W.*, Li K., Fang F. Z.*, Wang L. Y.  Fabrication of an Au-polystyrene sphere substrate with three-dimensional nanofeatures for surface-enhanced Raman spectroscopy. Applied Surface Science. 2015; 355: 1168-1174.

  19. Liu B., Fang F. Z.*, Xu Z. W., Zhang X. D. Design of five-axis ultrasonic assistant compound machine tool. Transactions of Tianjin University. 2015; 21(4): 312-316.

  20. Wang Z. Q., Gong H., Fang F. Z. Micro hole machining using double helix electrodes in electro discharge machining. Journal of Central South University (Science and Technology). 2015; 46(8): 2857-2862. (in Chinese)

  21. Zhang N., Srivastava A., Kirwan B., Byrne R., Fang F. Z., Browne D. J., Gilchrist M. D. Manufacturing microstructured tool inserts for the production of polymeric microfluidic devices. Journal of Micromechanics and Microengineering. 2015; 25(9): 095005.

  22. Zhang X. D., Zeng Z., Liu X. L., Fang F. Z.* Compensation strategy for machining optical freeform surfaces by the combined on-and off-machine measurement. Optics Express. 2015; 23(19): 24800-10.

  23. Pan L., Gong H., Fang F. Z. Ultra-precision polishing process of large freeform surface aluminum mirror. Nanotechnology and Precision Engineering. 2015; 13(2): 108-12. (in Chinese)

  24. Fang F. Z. “Manufacturing III” is the strategic choice for manufacturing development. People's Forum. 2015; 0(16): 59-61. (in Chinese)

  25. Fang F. Z. Suggestions to promoting the implements of “Manufacturing III”. People’s Daily, 2015.6.30. (in Chinese)

  26. Chai Z. Y., Wang Q. C., Zeng Z., Zhang X. D., Fang F. Z. Generation of optical vortex array using a wedge array. Acta Photonica Sinica. 2015; 0(4): 71-5. (in Chinese)

  27. Fang F. Z., Zhang H. Y., Song L., Pang K., Zhang Y. Development of fabrication and application of artificial compound eye system. Nanotechnology and Precision Engineering. 2015; 13(6):434-42. (in Chinese)

fengzhou.fang@ucd.ie

Tel: +353 1 716 1810

Centre of Micro/Nano Manufacturing Technology (MNMT-Dublin) 

School of Mechanical and Materials Engineering

University College Dublin,

Belfield Dublin 4, Dublin, Ireland

© 2019 MNMT-Dublin

Last updated: 14:31  3 July, 2020