top of page

  1. Pan J. D., Yan N., Zhu L. L., Zhang X. D., Fang F. Z., Comprehensive defect-detection method for a small-sized curved optical lens. Applied Optics. 2019; 59(1): 234-243. DOI: 10.1364/AO.59.000234.

  2. Hou J., Zhang H. G., Zhang N., Fang F. Z., Characterization of manufacturability of microstructures for micro-injection moulding of micro devices using star patterns. Journal of Micromechanics and Microengineering. 2019; 30(2): 025001. DOI: 10.1088/1361-6439/ab5da1.

  3. Melentiev R., Fang F. Z., Tailoring of surface topography for tribological purposes by controlled solid particle impacts. Wear. 2019; 444-445: 203164. DOI: 10.1016/j.wear.2019.203164.

  4. Wang X. H., Xu Z. W., Rommel M., Dong B., Song L., Tee C. A. T., Fang F. Z., Electron paramagnetic resonance characterization of aluminum ion implantation-induced defects in 4H-SiC. Nanotechnology and Precision Engineering. 2019; 2(4): 157-162. DOI: 10.1016/j.npe.2019.12.002.

  5. Han W., Fang F. Z., Two-step electropolishing of 316L stainless steel in a sulfuric acid-free electrolyte. Journal of Materials Processing Technology. 2019; 279: 116558. DOI: 10.1016/j.jmatprotec.2019.116558.

  6. Xie W. K., Fang F. Z., Mechanism of atomic and close-to-atomic scale cutting of monocrystalline copper. Applied Surface Science. 2019; 503:144239. DOI: 10.1016/j.apsusc.2019.144239.

  7. Vo Q., Duan Y. T., Zhang X. D., Fang F. Z., Non-contact method of thickness measurement for a transparent plate using a laser auto-focus scanning probe. Applied Optics. 2019; 58(35): 9524-9531. DOI: 10.1364/AO.58.009524.

  8. Xie W. K., Fang F. Z., Cutting-based single atomic layer removal mechanism of monocrystalline copper: edge radius effect. Nano Express. 2019; 14(1): 370. DOI: 10.1186/s11671-019-3195-4.

  9. O’Toole L., Kang C. W., Fang F. Z., Advances in rotary ultrasonic-assisted machining. Nanomanufacturing and Metrology. 2019; 3(1): 1-25. DOI: 10.1007/s41871-019-00053-3.

  10. Xie W. K., Fang F. Z., Cutting-based single atomic layer removal mechanism of monocrystalline copper: atomic sizing effect. Nanomanufacturing and Metrology. 2019; 2(4): 241-252. DOI: 10.1007/s41871-019-00045-3.

  11. Zhang H. G., Zhang N., Fang F. Z., Fabrication of high-performance nickel/graphene oxide composite coatings using ultrasonic-assisted electrodeposition. Ultrasonics Sonochemistry. 2019; 62: 104858. DOI: 10.1016/j.ultsonch.2019.104858.

  12. Xie W. K., Fang F. Z., Effect of tool edge radius on material removal mechanism in atomic and close-to-atomic scale cutting. Applied Surface Science. 2019; 504: 144451. DOI: 10.1016/j.apsusc.2019.144451.

  13. Xie W. K., Fang F. Z., Mechanism of atomic and close-to-atomic scale cutting of monocrystalline copper. Applied Surface Science. 2019; 503: 144239. DOI: 10.1016/j.apsusc.2019.144239.

  14. Duan Y. T., Vo Q. S., Zhang X. D., Wang Y. M., Huang S. Y., Fang F. Z., Novel method of measuring optical freeform surface based on laser focusing probe without calibrating focus error signal. Measurement. 2019; 148: 106961. DOI: 10.1016/j.measurement.2019.106961.

  15. He Y., Lai M., Fang F. Z., A numerical study on nanometric cutting mechanism of lutetium oxide single crystal. Applied Surface Science. 2019; 496: 143715. DOI: 10.1016/j.apsusc.2019.143715.

  16. Han W., Fang F. Z., Electropolishing of 316L stainless steel using sulfuric acid-free electrolyte. Journal of Manufacturing Science and Engineering. 2019; 141(10): 101015. DOI: 10.1115/1.4044518.

  17. O’Hara J., Fang F. Z., Advances in micro cutting tool design and fabrication. International Journal of Extreme Manufacturing. 2019; 1(3): 032003. DOI: 10.1088/2631-7990/ab3e7f.

  18. Luo H. H., Xu Z. W., Shi C. K., Hu M. L., Sun F. W., Shang L., Fang F. Z., Nanofabrication of nitrogen-vacancy color center. Current Nanoscience. 2019; 15(5): 433-435. DOI: 10.2174/157341371505190617141920.

  19. Liu L., Xu Z. W., Li R. R., Zhu R., Xu J., Zhao J. L., Wang C., Nordlund K., Fu X.,Fang F. Z., Molecular dynamics simulation of helium ion implantation into silicon and its migration. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms.2019; 456: 53-59. DOI: 10.1016/j.nimb.2019.06.034.

  20. Zhang H. Y., Fang F. Z., Gilchrist M. D., Zhang N., Precision replication of micro features using micro injection moulding: Process simulation and validation. Materials & Design.2019; 177: 107829. DOI: 10.1016/j.matdes.2019.107829.

  21. Zhang Y., Fang F. Z., Development of planar diffractive waveguides in optical see-through head-mounted displays. Precision Engineering. 2019; 60: 482-496. DOI: 10.1016/j.precisioneng.2019.09.009.

  22. Zhang K., Xu Z. W., Rosenkranz A., Song Y., Xue T., Fang F. Z., Surface- and tip-enhanced Raman scattering in tribology and lubricant detection—a prospective. Lubricants. 2019; 7(9): 81. DOI: 10.3390/lubricants7090081.

  23. Zheng Y. L., Song L., Huang J. X., Zhang H. Y., Fang F. Z., Detection of the three-dimensional trajectory of an object based on a curved bionic compound eye. Optics Letters. 2019; 44(17): 4143-4146. DOI: 10.1364/OL.44.004143.

  24. Liu T., Xu Z. W., Rommel M., Wang H., Song Y., Wang Y. F., Fang F. Z., Raman characterization of carrier concentrations of Al-implanted 4H-SiC with low carrier concentration by photo-generated carrier effect. Crystals. 2019; 9(8): 428. DOI: 10.3390/cryst9080428.

  25. Wang J. S., Fang F. Z., Yan G. P., Guo Y. B., Study on diamond cutting of Ion implanted Tungsten Carbide with and without ultrasonic vibration. Nanomanufacturing and Metrology. 2019; 2(3): 177-185. DOI: 10.1007/s41871-019-00042-6.

  26. Liu L., Xu Z. W., Tian D. Y., Hartmaier A., Luo X. C., Zhang J. J., Nordlund K., Fang F. Z., MD simulation of stress-assisted nanometric cutting mechanism of 3C silicon carbide. Industrial Lubrication and Tribology. 2019; 71(5): 686-691. DOI: 10.1108/ILT-03-2019-0096.

  27. Xu F. F., Huang W., Fang F. Z., Zhang X. D., Improving nanocutting surface quality by force-controlled rolling. Applied Nanoscience. 2019; 1(1): 763-769. DOI: 10.1007/s13204-019-01095-1.

  28. Wu D. X., Wang B., Fang F. Z., Effects of tool wear on surface micro-topography in ultra-precision turning. The International Journal of Advanced Manufacturing Technology.2019; 102(9-12): 4397-4407. DOI: 10.1007/s00170-019-03494-8.

  29. Gao W., Haitjema H., Fang F. Z., Leach R. K., Cheung C. F., Savio E., Linares J. M., On-machine and in-process surface metrology for precision manufacturing. CIRP Annals. 2019; 68(2): 843-866. DOI: 10.1016/j.cirp.2019.05.005.

  30. Yan G. P., Fang F. Z., Fabrication of optical freeform molds using slow tool servo with wheel normal grinding. CIRP Annals. 2019; 68(1): 341-344. DOI: 10.1016/j.cirp.2019.04.083.

  31. Yan G. P., Zhang Y., You K. Y., Li Z. X., Yuan Y. K., Fang F. Z., Off-spindle-axis spiral grinding of aspheric microlens array mold inserts. Optics Express. 2019; 27(8):10873-10889. DOI: 10.1364/OE.27.010873.

  32. Krishnan A., Fang F. Z., Review on mechanism and process of surface polishing using lasers. Frontiers of Mechanical Engineering. 2019; 14(3): 299-319. DOI: 10.1007/s11465-019-0535-0.

  33. Melentiev R., Kang C. W., Shen G., Fang F. Z., Study on surface roughness generated by micro-blasting on Co-Cr-Mo bio-implant. Wear.2019; 428: 111-126. DOI: 10.1016/j.wear.2019.03.005.

  34. Fang F. Z., Zhang N., Guo D. M., Ehmann K., Cheung B., Liu K., Yamamura K., Towards Atomic and close-to-atomic scale manufacturing. International Journal of Extreme Manufacturing. 2019; 1(1): 012001. DOI: 10.1088/2631-7990/ab0dfc.

  35. Song Y., Xu Z. W., Rosenkranz A., Rommel M., Shi C. K., Fang F. Z., Surface-enhanced Raman scattering on nanodiamond-derived carbon onions. Nanotechnology and Precision Engineering. 2019;2(1):35-39. DOI: 10.1016/j.npe.2019.03.005.

  36. Li Q., Fang F. Z., Advances and challenges of soft contact lens design for myopia control. Applied Optics. 2019; 58(7): 1639-1656. DOI: 10.1364/AO.58.001639.

  37. Shen G., Zhang J. F., Fang F. Z., In vitro evaluation of artificial joints: a comprehensive review. Advances in Manufacturing. 2019; 7(1): 1-14. DOI: 10.1007/s40436-018-00244-z.

  38. Melentiev R., Fang F. Z., Investigation of erosion temperature in micro-blasting. Wear. 2019; 420: 123-132. DOI: 10.1016/j.wear.2018.12.073.

  39. Melentiev R., Fang F. Z., Theoretical study on particle velocity in micro-abrasive jet machining. Powder Technology. 2019; 344: 121-132. DOI: 10.1016/j.powtec.2018.12.003.

  40. Zhang Y, Yan G. P., Li Z. X., Fang F. Z., Quality improvement of collimating lens produced by precision glass molding according to performance evaluation. Optics express. 2019; 27(4):5033-5047. DOI: 10.1364/OE.27.005033.

  41. Wang Y. M., Li Z. X., Fu Z., Fang F. Z., Zhang X. D., Radial scan form measurement for freeform surfaces with a large curvature using stylus profilometry. Measurement Science and Technology. 2019; 30(4):045010. DOI: 10.1088/1361-6501/ab052f.

  42. Wang Z. F., Zhang J. J., Xu Z. W., Zhang J. G., Hassan H., Li G., Zhang H. J., Hartmaier A., Fang F. Z., Yan Y. D., Sun T., Crystal plasticity finite element modeling and simulation of diamond cutting of polycrystalline copper. Journal of Manufacturing Processes. 2019; 38: 187-195. DOI: 10.1016/j.jmapro.2019.01.007.

  43. Wang J. S., Zhang X. D., Fang F. Z., Chen R., Diamond cutting of micro-structure array on brittle material assisted by multi-ion implantation. International Journal of Machine Tools and Manufacture. 2019; 137:58-66. DOI: 10.1016/j.ijmachtools.2018.10.005.

  44. Han W., Fang F. Z., Fundamental aspects and recent developments in electropolishing. International Journal of Machine Tools and Manufacture. 2019; 139: 1-23. DOI: 10.1016/j.ijmachtools.2019.01.001.

  45. Yan G. P., You K. Y., Fang F. Z., Three-linear-axis grinding of small aperture aspheric surfaces. International Journal of Precision Engineering and Manufacturing-Green Technology. 2020; 7: 997-1008. DOI: 10.1007/s40684-019-00103-7.

  46. Wu D. X., Wang B., Fang F. Z., Effects of tool wear on surface micro-topography in ultra-precision turning. The International Journal of Advanced Manufacturing Technology. 2019; 102(9-12): 4397-4407. DOI: 10.1007/s00170-019-03494-8.

  47. Musgrave C. S. A., Fang F. Z., Contact lens materials: A materials science perspective. Materials. 2019;12(2):261. DOI: 10.3390/ma12020261.

  48. Su Z. K., Zhang D., Gao L. Y., Yang Z. M., Fang F. Z., Zhang H. T., Li X. H., The self-calibration method for the vertex distance of the elliptical paraboloid array. Applied Sciences. 2019; 9(17): 3485. DOI:10.3390/app9173485.

bottom of page